On August 11, the General Motors Corporation(GM) initiative, the National Tire Rim Standardization Technical Committee (referred to as: National Roller Commission) sponsored by the Soft Control Co., Ltd. co-sponsored the national tire RFID tag promotion seminar held in Qingdao. The national rubber tire industry experts, scholars, business representatives of the exchange of seminars were attended this conference meeting.

国家货币委员会主任王先生Kexiansaid that the tire with RFID tags and other four industry standards have been released in 2016, the corresponding international standards of China is also leading the development, at the same time some domestic tire manufacturers in the relevant car manufacturers under the initiative, but also to varying usage percent/degrees, the use of tire RFID tags. China's tire industry with RFID tag further promote the application and laid a good foundation. He pointed out that an overview of the current global tire industry development situation, RFID electronic tags required in China tire industry application needs to speed up. He said that soft control shares as a global leader in the development of tire RFID technology, hoping to give tire companies and even the strong support of auto companies to help China's tire industry's intelligent development.

Shandong Province Rubber Industry Association, Mr. Zhang Hongmin said this year, Shandong Province, vehicle tire exports showed a rapid growth trend, the dominant position of private enterprises more prominent. At the same time, Shandong tire industry is also in urgent need of transformation and upgrading in both of quality and efficiency, to meet a variety of challenges. The soft control of the tire factory building and RFID international standards to promote the backbone of enterprises and research units of technological innovation, and further promote the tire industry technological progress and industrial development.RFID electronic tag/label applicationfor the transformation and upgrading of China's tire industry is essential, Shandong Rubber Industry Association is willing to work with colleagues from all walks of life to promote.

Soft Control Co., Ltd., President of the rotation in his introduction said that soft control from 2004 develop RFID for tire, went more than 10 years of research and development, testing, examing, application of the accumulation, has now formed a rfid product system just for the tire, From customization of tire RFID tags to automated production of RFID tires, RFID systems and production information and automated logistics docking, soft control are able to provide all aspects of support. In the continuous improvement of products, supporting capacity at the same time, soft control and wheel standard, the tire business together to complete the tire RFID industry standards, and actively carry out the development of 4 international standards for tire RFID. The batch of standards is for China's tire industry, the first batch of international standards, on behalf of China's tire in the development of international voice with RFID, soft control as a tire industry RFID solutions provider, the obligation is to have the ability and the Commission to work with tire companies together and continue to promote the tire RFID development process.

Dr. Hu Weibao published a keynote speech on the use of RFID tags for tires. He said that GM's annual production of 2 million vehicles, together with the number of tires needed for aftermarket, is about 25 million, to achieve product traceability And service sensitivity, GM since 2008 began to explore the application of one-dimensional code on tires. But with the continuous use of tires, one-dimensional code in tens of thousands of kilometers after the very easy to be destroyed, resulting in loss of information. With the introduction of Industrial 4.0, General Motors also entered the planning phase of the RFID chip for tires, and in 2016 General Motors communicated with suppliers and got a very good result, with RFID chips on the tire's full life cycle Traceability is just around the corner. Hu Houbao that the bar code to promote the growth of MES, but also for the development of RFID laid the foundation for the collection of technical information and feasibility analysis, by 2020, we still have enough time to do technical reserves and demonstration, I believe tire RFID chip will bring a new tire revolution.

Huang Lanfei, chief engineer of the Soft Control Co., Ltd. which specializes in "RFID Tire Promotion and Application", focuses on the promotion of RFID technology on the development of the tire industry chain, the development of RFID global standards for tires, and the analysis of tire RFID quality performance And application notes, tire RFID tag supply chain system, the global application of RFID tires, and RFID tire matching planning. She believes that the tire can be managed, controllable, traceable is the inevitable trend of industry development. RFID technology and tire technology effectively combine for each tire to provide a unique global identity information to achieve the tire life cycle of effective management and traceability. At present, the second generation of RFID as a tire logo has been in the global tire industry to reach a consensus. She said that in the application of RFID tires supporting the vehicle, the need for vehicle manufacturers to demand, the establishment of norms, tire manufacturers to provide customized RFID tires, tire RFID tag suppliers to do supporting support, the national standard committee to establish the appropriate standards system. To achieve China's RFID tires in the vehicle factory's comprehensive support, it will need all vehicle manufacturers, tire manufacturers, RFID suppliers and the National Commission gather work on the joint efforts.

玲珑轮胎,万历轮胎,住友橡胶,是the new tires, Michelin tires and other business representatives had change to speak also they agreed that with the development of the Internet of Things and the promotion of tire manufacturing, RFID applications to the tire has important practical significance and history Meaning, should accelerate the pace of application.

Finally, Mr. Wang Kexin made a statement, he thought the meeting reached a consensus at many levels. In the follow-up work carried out, he highlighted the six aspects of the content: First, General Motors planning the use of RFID tires, the establishment of RFID tire supporting standard specification system; Second, the tire factory and car manufacturers to promote the use of The main body of RFID technology should establish and improve the production system of RFID tires, and play a major role in further popularization and application. Thirdly, soft control as RFID technology and product provider of tire enterprises, from product system, automation, information and so on, Do the technical support work; Fourth, the landmark will be in the scale of RFID tire applications to do the appropriate standard specification construction, play the development of RFID tire application of the supervisory role; Fifth, the tire RFID tags to promote the seminar also Should continue to organize and invite more car manufacturers, tire companies and related units to participate in, and further expand the use of RFID technology; Sixth, tire RFID technology to promote the use of tires for the intelligent provides an important guarantee for the promotion of China Become a tire of intelligent manufacturing power laid the foundation.