2014-01-13(2)

Ϻţ⵽꣬ĻʾꡱGPO3ִлȴGPI3ȷǰѭ

Allowed number: Bad tag is detected, the screen shows "bad mark", output GPO3, execute bad count, then total count, and wait for GPI3 to confirm the output and ended the current cycle.

2014-01-17

ӱǩ˻ Added the tag filter configuration

1.ǩЭӡǩá In the tag protocol drop-down list, added tag filter configuration;

2014-02-26

1.HF_UltraLightý棻Added the interface configuration of HF_UltraLight;

2014-03-26

1.HF_UltraLightжϣ7ֽ׳쳣Added the inventory result length judgment of HF_UltraLight;

2014-04-28

1.޸һ汾޸֮14443AЭBugRepaired the 14443A protocol inventory bug in previous version;

2014-05-23

1.ʾڣȥꡱֹͣťBad tag tip window,removed the button of "Jump" and "Stop";

2014-06-03

1.޸0428汾HF_UltraLightǩжϴRepaired the HF_UltraLight invenroty tag length of error determination which cased by 0428 version;

2014-06-09

1.ƵдIPַļPut the IP address of the UHF reader into the configuration file;

2014-06-12

1.굯ʾꡢֹͣȷϣBad tag tip window, "Jump" and "Stop" for second confirmation;

2014-06-14

1.־ļ·ãLog file path can be configured;

2014-06-17

1.Ultralight ļ--: --Ultralight ; Ultralight output folder-renamed: Afford-Ultralight;

2014-06-27

1.UhfInlayAdded UhfInlay plug-in

2014-07-04

1.Epc96BitInitializationAdded Epc96BitInitialization plug-in

2014-08-05

1.ֶ֧ݹˣöŷָFiltering configuration supports multiple content filtering,the contest of filter is separated by commas;

2.UHF־ӹ˹ܣAdded filterfing for plug-in "UHF log";

2014-08-29

1.ӻʿдGEN2 V2ӿڣAdded the reader Gen2 V2 interface;

2014-08-30

1. Żȫ̵ʱʵֲŻӳ٣֤ÿ2ﵽ20msϼɣGPO4رʱ25ms, ǩ޷ѭ

Optimized the control parameters of the whole process,in order to achieve optimization of production capacity and no delay, to ensure that every two commands can be sent more than 20ms, the time of GPO4 opening and closing is adjusted to 25ms interval,or single tag can not be worked in cycle;

2. Żдʱ䣻 Optimized the inventory time of reader ;

2014-09-05

1.ָʱ Restore the bad tag output interval configuration;

2.UHFд640kHzƵʣٶ4 UHF reader sets 640kHz frequency, speed is increased 4 times;

3.UHFдʱ The inventory time of UHF reader can be configured;

4.޵ The limit configuration of bag tag output interval is adjusted;

2014-09-19

1.ӳ٣ʱBad tag ouput delayed,shows the results when it is end;

2014-10-17

1 .ӰдUHF_Reader_V3);添加巴西读者:UHF_Reader_V3;

2014-10-22

1.д߸ij2ţBrailian reader antenna is changed into No.2;

2.дùʣBrailian reader power is setted;

2014-10-29

1.IntermecIntermec plug-in;

2014-11-17

1.עĿǰֻһUHFڡUHF־õNote: the filter is only for UHF currently which will be used in "UHF production log";

2014-12-05

1.15693flag̶Ϊ0x02 15693 read flad is fixed to 0x02;

2014-12-10

1.ͳһ־ʽUnified log output format;

2014-12-12

1.UidAdded Uid for filter;

2014-12-15

1.־12λPlug-in log to make up 12 digit for Laiyongchu tag;

2014-12-16

1.־£Updated the reading log plug-in for Laiyongchu tag;

2015-09-17

1.15693ЭдAdded 15693 protocol for Huada reader;

2016-04-22

1.UltraLightOffsetΧӴ4-256Offset range of UltraLight is increased to 4-256;

2016-08-03

1.ϲǽ޸ĹĴ루·The modified code by Wuzhijie (Kiloway plug-in) is mergered;

2016-08-16

1.530UE̬⣬滻UltralightЭӿڣAdded 530UE dynamic library,replace Ultraligh protocol interface;

2016-08-17

1.Config_Tamper CheckAdded Config_Tamper Check plug-in;

2016-09-08

1.UltraLightЭ黻DLLThe Ultralight protocol changed to DLL;

2016-09-14

1.18K3M3дAdded 18K3M3 reader;

2.RL863-EXAMAdded RL863-EXAM plug-in;

2016-09-22

1.288DܹܣAdded encryption function for 288D UHF reader;

2016-09-28

1.288DܹӲ롱The encryption function of 288D reader is added to the parameter "old password";

2.RL863-EXAMӲ롱RL863-EXAM plug-in is added to the parameter "old password";

2016-10-23

1.Production Report generator automatic save in case of power lost, will just loose one piece of record for current tag

2.changing NFC plug-in function in English version

3.changing UHF reader debug software as a popular interface and default parameter configed in advance.

2016-11-8

new Plug-in of FASTAG for ETC program application updated

2016-11-9

Fix bug in Barcode function located in "Scanner Config", modify "disable" to be "enable"

Fastag Reports with "-" as barcode seperate sympol.

2016/11/10

1)2016-8-8µAPIӿ"Ultralight V1.1-֧64.rar"TIDȡݲBUG,(pageд) ͨѶЭIJ׽ʵ,APIӿ.

On 2016-8-8,the update of API interface "Ultralight V1.1-֧64.rar" has the bug which read that TID data wrongly ( read and write of data page is correct), use the capturing method of changing communication protocol instead of API interface.

޸BUGӰ첿HF_UltralightЭü.

Repaired the effect of other parts by bug,includes HF_Ultralight protocol setting and plug-in.

Plug-in includes: Ultralight report, Ultralight-NFC

2)޸Э鼰 Changed relative protocol and name of plug-in

HF_14443A ---> HF_14443A_530UE

HF_14443B ---> HF_14443B_530UE

HF_15963——> HF_15693_530UE

HF_Ultralight --> HF_Ultralight_530UE

Ultraglight Report ---> 530UE-Ultralight Report

14443Aɫ ---> 530UE-14443Aɫ

14443A Report ---> 530UE-14443A Report

15693 write test ---> 530UE-15693 Write Test

15693 Report ---> 530UE-15693 Report

15693 ---> 530UE-15693

Ultraglight-NFC ---> 530UE-Ultralight-NFC

Ultralight-NFC-530UN ---> 530UN-Ultralight-NFC

14443A-NFC ---> 530UE-14443A-NFC

2016/11/11

FastagһжϹ(޳ɨ費ǩ), Hex_Barcode_SerialNo = 00000 ͬжΪFail.

Fastag plug-in added a rule to judgement (reject the bad scanning tag), if shwos " Hex_Barcode_SerialNo = 00000 ", means "fail".

2016/11/14

1) 530UN-Ultralight-NFC\530UE-Ultralight-NFC\530UE-14443A-NFC, ־ļ, ʽΪSN; Time; UID; NFC Record; Result

**(Ϊ־ֶεı,̶ӡȥ)

2) ־288D-General Report, 2204-Genenal Reportвݴ"д""ASCIIת"ܲ

“数据源(ѡ)”- >“DataProcessor(ݴ)”——>“DataProcessor->ASCII(ת)"

"""DataProcessor->ASCII"ת

3)޸:

Config/ϵͳ --->Default Config/׼

DataSource->ASCII --->DataProcessor->ASCII

Scanner Config/봦 --->Other DataProcessor/ݴ

Auto Config/Զ --->Auto DataProcessor/Զݴ

Other DataProcessorݿ⴦-->֧ScannerDatabase˫

4)ƷԪ ---> (Իɻ¼)--> ҪѲΪ2(ƫ-->ݻ)

5)޸18K3M3ЭWin2K豸ϵͳ޷ʹõBUG,Ӷ̬ļIrprops.cps

6)޸NFC 3־ʱNDEF RECORDΪıַ

7)FASTAG, Զ̷У,""ָTID,EPC,USER,Ȼ־"д"ͬ,ҪBARCODEԭʼ-(6λȼһ,һߵ10λټһ)

: 6074170050008000Ӻߺ607417-005-0008000

8)޸FASTAG, USER""ʱADDRESSCOUNTҪ, USER"д"ַҪ

2016/11/15

1)530UN-Config43N1F־, ־ʽSN;Time;UID;Tampercheck;Result

ͬѡַλ0x2A, 0x2A, 0xE4, 0xE4,0xF2ͬ,2bytes ="00 00"TamperCheckλ

ضһ, жTamperCheck="00 00"ΪUntampered, Result=OK

2)288D-TamperCheck, ־ʽSN;Time;TID;EPC;TamperCheck;Result

TamperCheck: EPC 0x20(hex),Count=1, ֵ0080/C040/0040, жTamperCheck=8040Result=OK

""ʱȡTID,EPCTamperCheck EPCж־

"д"ʱ"׼ԴDataProcess->ASCII"дEPC,֮TamperCheck EPCжϽ־

2016/12/28

New Changes for the Plug-in Kit of "288D-General Report" increased one more Barcode column as a general report, support Read and Write both mode.

һж(Read/Writeж)ʹScannerΪSourceDataʱ, ־ Barcodeֶ(ԭʼɼ),ScannerSourceDataBarcodeֶ

2016/12/28

New Changes for Plug-in kit of "FASTAG" ,ѡж:

there are some options for choose " Write&PermaLock, PermaLock Only and Write Only"

1) Lock Only = EPC PermaLock-->User PermaLock-->KillPassword PermaLock

2) Write & Lock = EPC+user plus " PermaLock EPC+USER+KillPassword"

3) Write Only - just write "EPC+user"

2017/1/2

Added new Plug-in"288D-FASTAG2", most are same with FASTAG, loading database as program DataSource. Read to generate report for customer, Write and generate final report for program purpose.

ԭBolivia,ʱݿ,Ȼɴݿͻṩܼܲд뵽EPCUSER,֮жϲǷҪPermaLockWrite Only, 尴"20170109 UHF288D-FASTAG2Ҫ-ֶд2.zip"

2017/1/9

Added new function of "Filter" which is Barcode filter, and change display to understand more for operator. support both of Read and Write mode.

Barcode Filter,SCANNERԴͷ, ͬʱ֧READWRITE˫ģʽ¿ɹ,̹Ϊ" Scannner ->Filter->DataProcessor-"Read/Write"

2017/1/10

Exchange function between "Write only" and "Lock Only" from plug-in of FASTag and FASTag2 to be fixed, disable Internet connection to speed up the UPH while machine running in "lock Only" mode.

2017/2/27

New Plugin of "530UE-Ultralight-Tagcopy" is added, according to requirement of multi-block data write(Read function is not applicable), prepare one TXT files including all of information similar to below sample listed, and selected for encoding write process, each line inside the TXT file contains HEX offset Page/Block address, seperate sympol":", BlockData for this offset, all digits are HEX format except ":"

如果写入数据包含密码块,数据should be place in last line, otherwise will cause writing fail or return error.

----Sample Data inside TXT file-----

04:0335D101

05:3533036E

06:66232E33

07:31357968

08:38273133

09:38742341

29:E0000CFF

2A:10000000

2B:00000000

2017/3/6

Plugin of "288D-FASTAG" increased one more function to both support the barcode number including"-" or without"-", and judge fail label by a new condition rule as it's right digits containing "0000000" insead of 16 digits 0 typed and more efficiency

Plugin of "288D-FASTAG2" , judge fail label by a new condition rule as it's right digits containing "0000000" insead of 15 digits 0 typed and more efficiency

2017/3/18

Plugin of "288D-General DataWrite" increased, under DATABASE public function, to select data for general datawrite, the data file will be TXT format and the data was specified in a certain rules as below listed which can include EPC, USER, RESERVED or just one of them and there is no sequence required, each line will be wrote into just one tag, one by one followed, and one by one programed by automatically.

For example:

Program EPC, you have to write EPC:Data-information;

begining is Bank name, ending should be ";" as seperation

Program USER,you have to wirte USER:data-information;

Program RESERVED, same process

Allow to write datas for multi and different memory Banks

between banks seperation is ";"

Each bank =Bank name+":"+"Bank Data"

For example below"general-file.txt" located in "Driver D" ready for program

d:\documents\rfid_encoding\Database\general-file.txt

EPC:3159AFB9010001FF01000114;

USER:13020001FF010002B9AF5931;

RESERVED:00100003

EPC:3159AFB9040001FF0100040D; USER:0D040001FF010004B9AF5931; RESERVED:00100004

USER:0E030001FF010003B9AF5931; EPC:3159AFB9030001FF0100030E; RESERVED:0010004

EPC:3159AFB9040001FF0100040D; USER:0D040001FF010004B9AF5931; RESERVED:00100004

RESERVED:00100004; EPC:3159AFB9020001FF01000213;

2017/3/18

Plugin of "FASTAG" judge fail label by a new condition rule as it's right digits = "0000000" insead of 15 digits 0 typed and more efficiency

2017/6/12

Thingmagic M6E Reader is able to connect with Encoding Mahince with Fixed frequency & HFSS frequency

Reader M6E human interface with scroll bar to allow display all infos.

2017/6/12

Change plugin name from IF2-Intermec to IF2-Brazil-ETC

Add new plugin named M6E-Brazil-ETC

Add new plugin named M6E-General-Report

Change plugin function of M6E-brazil-ETC to show both of EPC and TID from main window

Correct Fail report inside of M6E-Brazial-ETC plugin, without space between data columns.

2017/6/13

改善the plugin of FASTAG/FASTAG2 to get visible Pantone Color from main window with FLASH light the Image of Pantone Color in every 2 seconds, prevent mistaken of the VC wrong typing.

exception of initialization EPC 96 and 128bits for 3 readers UHF288D/2204/M6E, Allow to init EPC bank length from config2.xml file. EPC init length can be any times of 32bits, so they will be 64bits, 6bits,128bit,160bits,192bits,224bits,256bits,

288bits,320bits,352bits,384bits,416bit,448bit,480bit,512bit and so on

2016/6/13: UHF288D protocol increase "scroll bar" ҲҪӹ

2017/8/11: New Plugin for ciggaret SM7зnew plugin

2017/8/28: Confirm the Enable function "OtherDataConfig" is for filter and function setup both

2017/9 /4:

Major window interface increase information width to be 4 lines,allow to indicate more status from machine program and inspection;

UHF288D procotol has increase one more selection to maximum support 4 antenna, means each transaction will program/inspect more than 1pcs of tag or label, to enhance capacity from 1 to 4, means 4 times capacity and 4 times of web size of the labels (4pcs labels parellelly )can be program/inspect from this machine

Related UHF288D-General-Report is also improved to support 1-4 pcs of tag in every report line. seperation as same as previous design.

1) UHF288DдЭ޸3Ϊ4,űǩ˳⣬ͬʱӽAnt1,Ant2,Ant3,Ant4,ѡִмζдʾ÷ֺŸ룬TID1:xxxx;EPC1:xxxx;TID2:xxx;EPC2:000

UHF288D-General-Report޸ģʽÿʾ¼TID1/EPC1/TID2/EPC2/2017/7/4Ʒз---̲new plugin

2017/9 /25:

1)allow plug-in Ʒз repeat program tags

2)bug fix for UHF288D-general-report, in order to correct EPC and TID confused because of communication error, re-connected again if error found

2017/11/28:

New encoding algorithm for FASTAG plug-in

2017/9 /25

1)allow plug-in Ʒз repeat program tags

2)bug fix for UHF288D-general-report, in order to correct EPC and TID confused because of communication error, re-connected again if error found

2018.1.19

1)288D-General-DataWrite add new function of LOCK and PermaLock for EPC,User and reserve,Lock process is after writing process ѡLOCK288D-TamperCheckûж޸8084C0404040Ϊñ꣬0040Ϊ EPC(0x20)=0080/C040/0040=Fail, 8040=OK, revised to be: 0040=Fail,8040/C040/4040=OK

2)288D-General-DataWrite-- Add Lock & PermaLock function

2018.1.19

add new DataSource from"Camera" created in main menu and "Setup", in order to collect QR-code,1D/2D Barcode automatically, also quality inspection for label visual check by machinecameraɼܣʵ1D,2D Barcode,̬ɼԶʶ

2018.2.2

1New plug-in of 288D-MVM-ETCETC Application-SAM CARD Encrypted Encoding

2Add CSV format of output report into plug-in of 288D-General-DataWrite

2018.2.10

1)288D-MVM-ETC fail encoding was added into report,barcode 00000000 was defined as fail encoding to ignore/skip printing issue»괦

2)Improved production capacity for the Camera Datasourceͷ

2018.3.2

plug-in "288D-MVM-ETC" report format was changed in order to fit packing purpose, PackNo and CartonBox both allow more letters for report generation. put more other data into specified report.

2018.3.22

1) plug-in "288D-TamperCheck"

using barcode as DATAsource, put barcode data into report also.

fix software bug in the operation method of "Write" selection, TamperCheck judgement is revised as "0040 is tampered, other data is un-tampered"

if barcode is ="00000000" (eight piece of 0), QC result = Fail, add fail history also into report

2)Fix bug for Camera - DataSource, "Pause" operation will transfer last history to current record. Clear memory buffer / cache not to transfer data to next record any more. which is as same as the barcode - DataSource.

3)Plugin of "288D-MVM-ETC" , add more input frame for the new report requirement, like "Pack No/Carton Box", seperate each column to be two columns.

fix counter repeating issue.

2018.3.23

1Plugin of "288D-TamperCheck", if EPC reading at offest 0x20 got fail, will make retry 3times, in order not to missing good tags.

ݾ¶ζݲʾ

2018.3.30

Add 4 new plug-in as below, especially for single piece of rfid/nfc tags, with real counter function, means same TID/UID/EPC, counter will just count qty for 1time even though more than 1 time inspection for same piece of tag, plug-in has unique piece of report function buildin also, real seperation qty setting is configed from plug-in itself.

--530UE_14443A_Real Counter

--530UE_15693_Real Counter

--530UE_Ultraglight_Real Counter

--288D_Real Counter

4ĹͳƬ״ǩʵʺϸ־ܡ

ѡʱϻһʾReal Counterͼ

ͬһƬǩܳɹٴΣReal Counter־ֻ¼һμ

2018.5.23

1) plug-in "530UE-Ultralight-NFC", "530UE-14443A-NFC", "530UN-Ultralight-NFC" was included more NDEF protocols except URL type, Lock Tag was made with an extra option for selection.

2) Plug-in "M6E-HGS" was created for DLL loading file "libtagCreateLib_21052018.dll" in order to generate TAG UserData, AccessPassword according to related tag TID & Barcode number. Operation Code is confidential.

2018.8.31

1)plug-in "530UE-Ultralight-NFC", "530UE-14443A-NFC", "530UN-Ultralight-NFC extended "EN" type to be 2 options "EN" and "en" both.